Fittings
Manufacturer of fittings in stainless steel and special alloys.
Cap | End Cap
Stamped
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, CR, WPS and WPW-X.
Dimensions: from 1/2″.
Junction | Cross
Seamless and Welded
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, CR and WPW-X.
Dimensions: from 4″.
Straight TEE | Reducing TEE
Seamless and Welded
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, CR and WPW-X.
Dimensions: from 4″.
Concentric and Eccentric Reducers
Rolled – Seamless and Welded
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, AWWA, CR, and WPW-X.
Dimensions: from 4″.
Short Lug | MSS SP-43 | Stub End
Stamped, MSS and SE
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, AWWA, CR, and WPW-X.
Dimensions: from 1/2”.
Elbow | Stamped | 3XD | 5XD
Seamless and Welded
Alloys: AISI 304, 304L, 316, 316L, 321, 410, 444, CuNi, Duplex, Superduplex, and SX.
Stamped: from 4″ to 40″ – Long Radius; from 4″ to 28″ – Short Radius.
Thickness: 2.0mm to 16.0mm – standard OD and SCH.
3xD and 5xD: from 4″ to 20″.
Finish: as-rolled, washed, blasted, ground, and/or polished.
Manufacturing standards: A-403, ASME B16.9, MSS SP-43, AWWA, CR, and WPW-X.